Rally Raid

Rally Raid KTM 690 Manual Cam Chain Tensioner

Review by Andy

Rating:

An easy replacement for the automatic tensioner.
This tensioner is easy to install and easier to adjust. The instructions call for the removal of the stator cover, which I believe to be unnecessary, at least if you know how to place the piston at TDC by turning the rear wheel and watching the camshaft. If you do elect to remove the stator cover, you might as well order the associated gasket now, as you're gonna need it.

Rally Raid KTM 950/990 Adventure Front Rally Fairing

Review by Chris

Rating:

Wowzers!.
KTM Twins has done it again. Fast shipping and a high quality product. Bolted right up and has a very nice fit and finish.The coloring is very close to KTM orange. It does look a little naked IMO. Thats why I ordered a Dakar Rally number plate. I'll send Ron the pictures when I get them on. Pros: Low profile for when im off-roading -Very clean lines -Sturdy, No movement at 100+ mph -I'm 6'3" and the wind hits my helmet nicely, will be great on hot days. Also good to have when its raining, when your at freeway speeds it will blow the rain water off your visor thus improvving visibility when your at speed. Cons: Makes me want to build a navigation tower.

Rally Raid KTM 690 Enduro Rally Skid Plate Center Stand

Review by Kevin

Rating:

Needs Revision!.
I added the stand to my existing RR skid plate. It comes with a template that makes drilling the skid plate and bolting things together easy. There is no instructions, but its mostly straight forward. They include a a bracket and rubber kickstand strap that mounts to the exhaust heat shields. Bummer is, The rubber strap must be stretched way too far, and will not last very long. I also wish that the spring assembly included to lift the center stand was different as it is not adequate. It is necessary to lift the center stand upward, and then secure it with the rubber strap. As far as the center stand, it needs to be revised!!! It does not sit at the right angle, and the bike comes off the center stand with the slightest bump of the bike. Like the other review, I am looking at making a lock that will make the center stand usable. Without a lock, I could not imagine changing a flat without someone holding the bike, or something stopping the bike from rolling forward.

Rally Raid KTM 950/990 Adventure Front Rally Fairing

Review by SF_Rider

Rating:

THIS is the solution.....
The stock fairing gave me 'bobble head'.... The unmanaged blast of air hitting my face and upper chest was a lot to deal with. Very turbulent. I ordered the taller touring screen. While this was a big improvement over the stock screen it was annoying as the top of the screen sits at eye level. And off road even in minimal bumps it felt as though I needed to be aware not to get a face full of windscreen. The new Rally Raid fairing solves all my issues. I'm 5'9" with 30" inseam. This does not eliminate air hitting the rider. However it does manage the air and you get an even stream of air without any rough and unexpected blasts of air that I got from both other screens. Up to 100mph it's silky smooth! Also it's small enough that it's not a worry off road and it's not at all in my vision. For anyone that is getting the 'bobble head' blasts of air I strongly recommend this product. Worth every single penny.