***** FOR RACE USE ONLY. CANNOT BE SHIPPED TO CALIFORNIA ADDRESSES PER THE CALIFORNIA RESOURCE ACT ***** It's finally here. After literally 3 years of research and production DynoJet has brought the KTM 690 Power Commander V to the market. This little box will allow the tuner to fine tune your fuel injection regardless of which exhaust, air filter or any other modification you may of done. It allows the tuner to build custom maps to compensate for different tracks or riding styles. This is what you need if you have a KTM 690 and want to go about making it better then stock.
Reduced size from PCIIIusb (less than half of the size of PCIII)
USB powered from computer (9 volt adapter is no longer needed for programming)
2 position map switching function built in (map switch not included)
Gear/Speed input (allows for map adjustment based on gear and speed)
Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature)
With gear position input connected the PCV is capable of allowing each cylinder to be mapped individually and for each gear (for example: on a 4 cylinder bike with a six speed transmission there could be up to 24 separate fuel tables).
Unit has a -100/+250% fuel change range (up from -100/+100%). This allows more adjustment range for 8 injector sportbikes
10 throttle position columns (up from 9 on PCIIIusb)
Enhanced “accel pump” utility (increased adjustment and sensitivity ranges)
USB powered from computer (9 volt adapter is no longer needed for programming)
2 position map switching function built in (map switch not included)
Gear/Speed input (allows for map adjustment based on gear and speed)
Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature)
With gear position input connected the PCV is capable of allowing each cylinder to be mapped individually and for each gear (for example: on a 4 cylinder bike with a six speed transmission there could be up to 24 separate fuel tables).
Unit has a -100/+250% fuel change range (up from -100/+100%). This allows more adjustment range for 8 injector sportbikes
10 throttle position columns (up from 9 on PCIIIusb)
Enhanced “accel pump” utility (increased adjustment and sensitivity ranges)
| Fits | 690 Enduro, 690 Supermoto, 690 Duke, 690 SMC |
|---|
Check items to add to the cart or select all
-
Dynojet KTM 690 Autotune Kit$279.95 -
Download Dynojet KTM 690 Power Commander Installation Instructions here.
Related Products
Check items to add to the cart or select all
